Filter
Top Products
e-STUDIO160/200/250 ADJUSTMENT ITEMS 1 - 74 December 2002 TOSHIBA TEC
3. Hold original glass stay to original glass and
tighten 2 screws.
Fig. 1-8-3
1.8 Adjusting the Scanner Section
1.8.1 Installing glass
(a) Installing ADF glass
To install new ADF glass, wipe off the mounting
surface and mount the glass by placing it at the
position shown right.
Fig. 1-8-1
(b) Installing original glass
Original glass should be installed in the following
manner:
1. Place the ADF glass by aligning with the posi-
tioning tab.
2. Hold original glass to the stopper and tighten 4
screws.
Fig. 1-8-2
ADF glass
Original
glass
Stopper
Tab
Screw
Original glass stay
Screw
Original glass
043-3
043-4
043-5