Toshiba e-Studio250 Work Light User Manual


 
December 2002 TOSHIBA TEC A - 3 e-STUDIO160/200/250 APPENDIX
First copy time ...................... e-STUDIO160 series: Less than 7.9 seconds (A4/LT, the Upper cas-
sette, 100%, original placed manually)
e-STUDIO200 series: Less than 7.0 seconds (A4/LT, the Upper cas-
sette, 100%, original placed manually)
e-STUDIO250 series: Less than 7.0 seconds (A4/LT, the Upper cas-
sette, 100%, original placed manually)
Warming-up time .................. e-STUDIO160 series: Less than 60 seconds
e-STUDIO200 series: Less than 75 seconds
e-STUDIO250 series: Less than 75 seconds
Multiple copying ................... Up to 999 copies; entry by numeric keys
Reproduction ratio ................ Actual ratio: 100%
Zooming: 50 - 200% in increments of 1%
25 - 400% in increments of 1%
(for e-STUDIO200/250 series; with original cover)
Resolution/Gradation ........... Read: 600 dpi x 600 dpi
Copy: 600 dpi x 600 dpi
Printer: 1200 dpi x 600 dpi
Fax: 16 dot/mm x 15.4 dot/mm (406 dpi x 392 dpi)
Paper feeding ....................... Automatic feeding: Copier’s cassette 1 piece standard
e-STUDIO160 series: Expandable up to 3 pieces by installing
optional cassettes.
e-STUDIO200/250 series:Expandable up to 4 pieces by installing
optional cassettes.
PFU-optional (Stack height 60.5 mm, Equivalent to 550 sheets; 64 to
80 g/m
2
(17 to 21 lb.))
PFP-optional (Stack height 60.5 mm, Equivalent to 550 sheets; 64 to
80 g/m
2
(17 to 21 lb.))
LCF-optional (Stack height 165 mm, Equivalent to 1250 x 2 sheets;
64 to 80 g/m
2
(17 to 21 lb.))
Bypass feeding (Stack height 16 mm, Equivalent to 100 sheets; 64 to
80 g/m
2
(17 to 21 lb.))
Capacity of originals of
automatic document feeder .. A4, A4-R, B5, B5-R, A5-R, LT, LT-R, ST-R: 50 sheets (with ADF)
B4, Folio, LG, Comp, A3, LD: 50 sheets (with ADF)
A4, A4-R, B5, B5-R, A5-R, LT, LT-R, ST-R: 100 sheets (with RADF)
B4, Folio, LG, Comp, A3, LD: 100 sheets (with RADF)
Toner supplying .................... Automatic toner sensor detection
Density control...................... Automatic density mode and manual density mode selectable in 7
steps