Filter
Top Products
TL-WR700N
150Mbps Wireless N Mini Pocket Router
- 98 -
server in this device will not start up.
3. If the new LAN IP address you set is not in the same subnet with the previous one, the IP
Address pool in the DHCP server will be configured automatically, but the Virtual Server and
DMZ Host will not take effect until they are re-configured.
6.6 Wireless
Figure 6-7 Wireless menu
There are two submenus under the Wireless menu (shown in Figure 6-7): Wireless Settings and
Wireless Security. Click either of them, and you will be able to configure the corresponding
function.
6.6.1 Wireless Settings
Choose menu “Wireless
→
Wireless Settings”, and then you can configure the basic settings
for the wireless network on this page.
Figure 6-8 Wireless Settings - Bridge
SSID - Enter a string of up to 32 characters. The same name of SSID (Service Set
Identification) must be assigned to all wireless devices in your network. The default SSID is
set to be TP-LINK_XXXXXX (XXXXXX indicates the last unique six numbers of each
Router’s MAC address). But it is recommended strongly that you change your networks