TP-Link TL-WR700N Router User Manual


 
TL-WR700N
150Mbps Wireless N Mini Pocket Router
- 9 -
Note:
The Device is equipped with Smart IP function, which would help to enable its built-in DHCP
server when its required. For your convenience, please configure your PC or other clients to
Obtain an IP address automatically. If you need any instructions as how to do this, please refer
to Appendix B: "Configuring the PC”
.
Figure 2-5 Hardware Installation of the TL-WR700N in AP Mode
1. Connect the LAN port of TL-WR700N to the wired network port with an Ethernet cable.
2. Plug the power plug of TL-WR700N in electrical wall socket.
3. Power on the PC(s) and notebook(s).