Filter
Top Products
TL-WR700N
150Mbps Wireless N Mini Pocket Router
- 13 -
The Router supports three popular ways Dynamic IP, PPPoE and Static IP to connect to the
Internet. To make sure the connection type your ISP provides, please refer to the ISP. Make sure
the cable is securely plugged into the WAN port before detection.
Dynamic IP - Your ISP uses a DHCP service to assign your Router an IP address for
connecting to the Internet. When the Router connects to a DHCP server, or the ISP supplies
you with DHCP connection, please choose this type.
If you select this type of connection, you
just need to click Next and proceed to Figure 3-7.
PPPoE - For this connection, you will need your account name and password from your ISP.
If you have applied ADSL to realize Dial-up service, you should choose this type. Under this
condition, you should fill in both the User Name and Password that the ISP supplied, then
click Next and proceed to Figure 3-7. Please note that these fields are case-sensitive.
Figure 3-5 Quick Setup - PPPoE
Static IP - This type of connection uses a permanent, fixed (static) IP address that your ISP
assigned.
In this type, you should fill in the IP address, Subnet Mask, Default Gateway, and DNS IP
address manually, which are specified by your ISP. Then click Next and proceed to Figure
3-7.
Figure 3-6 Quick Setup - Static IP
3. The Finish page is shown as Figure 3-7. Click the Reboot button to make your wireless
configuration take effect and finish the Quick Setup.