TP-Link TL-WR700N Router User Manual


 
TL-WR700N
150Mbps Wireless N Mini Pocket Router
- 80 -
Wireless Mode - The current wireless working mode in use.
Name (SSID) - The SSID of Root AP.
Channel - The current wireless channel in use.
MAC address - The physical address of the Router, as seen from the WLAN.
System Up Time - The length of the time since the Router was last powered on or reset.
Click the Refresh button to get the latest status and settings of the Router.
5.3 Quick Setup
Please refer to Section 3.2.2.
5.4 Working Mode
The Router supports five operation mode types: Router, Repeater, Bridge, Client and AP.
Please select the mode you want. Click Save to save your choice, which is shown as Figure 5-3.
Figure 5-3 Working Mode
Router - The wireless Router Mode. In this mode, the device enables multi-user to share
Internet via DSL/Cable Modem. The only wired port works as WAN.
Repeater - The wireless Repeater Mode. It could extend the range of wireless network.
Bridge - The wireless Bridge Mode. It could communicate with another wireless network.
Client - The Client Mode. The computer connected by Ethernet could get access to an AP by
Client mode.
AP - The wireless access point mode.
Click OK in the following screen and then the Router will reboot and to work on Client Mode.