TL-WR700N
150Mbps Wireless N Mini Pocket Router
- 82 -
2. If you select the type of Smart IP (DHCP) and there is a DHCP server forward, the DHCP
server in this device will not start up.
3. If the new LAN IP address you set is not in the same subnet with the previous one, the IP
Address pool in the DHCP server will be configured automatically, but the Virtual Server and
DMZ Host will not take effect until they are re-configured.
5.6 Wireless
Figure 5-7 Wireless menu
There is one submenu under the Wireless menu (shown in Figure 5-7): Wireless Settings. Click
it, and you will be able to configure the corresponding function.
5.6.1 Wireless Settings
Choose menu “Wireless
→
Wireless Settings”, and then you can configure the basic settings
for the wireless network on this page.
Figure 5-8 Wireless Settings - Repeater
SSID - The SSID of AP that you want to access.
MAC of AP - The MAC address of AP that you want to access.
Region - Select your region from the pull-down list. This field specifies the region where the
wireless function of the Router can be used. It may be illegal to use the wireless function of