TP-Link TL-WR700N Router User Manual


 
TL-WR700N
150Mbps Wireless N Mini Pocket Router
- 33 -
4.5.2 LAN
Choose menu Network
LAN, and then you can configure the IP parameters of the LAN on
the screen as below.
Figure 4-12 LAN
MAC Address - The physical address of the LAN ports, as seen from the LAN. The value
can't be changed.
IP Address - Enter the IP address of your Router in dotted-decimal notation (factory default:
192.168.0.254).
Subnet Mask - An address code that determines the size of the network. Normally use
255.255.255.0 as the subnet mask.
Note:
1. If you change the IP Address of LAN, you must use the new IP Address to login to the Router.
2. If the new LAN IP Address you set is not in the same subnet with the previous one, the IP
Address pool in the DHCP server will be configured automaticallywhile the Virtual Server and
DMZ Host will not take effect until they are re-configured.
4.5.3 MAC Clone
Choose menu Network
MAC Clone, and then you can configure the WAN MAC address
on the screen below, as shown in
Figure 4-13:
Figure 4-13 MAC Address Clone
Some ISPs require that you register the MAC Address of your adapter. Changes are rarely
needed here.