TL-WR700N
150Mbps Wireless N Mini Pocket Router
- 143 -
Note:
The DHCP Settings function cannot be configured if you have chosen Smart IP (DHCP) in Network ->
LAN, in which situation the device will help you configure the DHCP automatically as you need. The
DHCP Settings page will appear as Figure 8-15.
Figure 8-15 DHCP Settings
Figure 8-16 DHCP Settings
DHCP Server - Selecting the radio button before Disable/Enable will disable/enable the
DHCP server on your Range Extender. The default setting is Enable. If you disable the
Server, you must have another DHCP server within your network or else you must manually
configure the computer.
Start IP Address - This field specifies the first address in the IP Address pool. 192.168.0.100
is the default start IP address.