Filter
Top Products
K11020 VisionSensor™ 2030 User Manual, Rev. E, Software ver. 3.1.1000, August 3, 2007 - 7
Save Settings
1.6 - Cabled Operation
1.6.1 - Introduction
The VS 2030 is available with USB and RS232 cables. All of the cables are connected to the VS 2030
with an 8-pin DIN connector. Different cables may be required for different hosts.
To install a cable on the standard unit, correctly line up the 8-pin DIN connector into back end of the unit.
The arrows on the connector should be facing down. When they are lined up, rmly push the cable in.
The cable has a locking mechanism that will rmly hold the cable in place.
To detach the cable from the reader, YOU MUST grip the plastic on the 8-pin din and pull back to disen-
gage the connector.