Filter
Top Products
K11020 VisionSensor™ 2030 User Manual, Rev. E, Software ver. 3.1.1000, August 3, 2007 - 41
Save Settings
4.4 - Backlight Timeout Settings
4.5 - Laser Settings
Scan one of the following codes to set the brightness of the VS 2030 laser.
High (Default) Medium Low
Scan the following codes to turn laser targeting on/off:
On (Default) Off
Scan the following codes to set the backlight settings:
Backlight Off 3 seconds (Default) 6 seconds 10 seconds
4.6 - Reader Power Off Settings
Scan the following codes to set the amount of time before a reader powers off:
1 Hour 2 Hours - Default 4 Hours
Press and hold any red trigger on the reader (for three seconds) to power on a unit.