Filter
Top Products
K11020 VisionSensor™ 2030 User Manual, Rev. E, Software ver. 3.1.1000, August 3, 2007 - 53
Save Settings
7.1 - Reset Reader to Factory Defaults
Scan the following codes to reset reader:
Reset to USB Factory Reset to RS232 Factory
Default Settings Default Settings
Bootloader Mode
Clear All CodeXML Rules Clear All Stored Data Save Settings
Prex & Sufx
Note: If you scan these codes, you may lose your current settings. Make sure to save settings on your
reader before scanning the above codes.
7.2 - General Safety Information
Repairs and Adjustments - Only those individuals authorized by Videk should attempt to make repairs or
adjustments to VS 2030 equipment. If the reader casing is opened the warranty is voided.
Power Supply - Use only the power supply provided for use with each specic unit when operating Videk
equipment.
Accessories - Only those accessories approved by Videk should be utilized with Videk equipment. Non-com-
pliance with any of the above may result in:
• Injury to individuals handling the equipment;
• Damage to the equipment; and
• Voiding of the maintenance contract.
Lasers - The VS 2030 utilizes a laser FOR TARGETING PURPOSES ONLY. If the laser is activated, do not
stare into the beam. See pg. i for further information regarding laser warnings.
Bootloader mode is
utilized to download new
version of bootloader
rmware and custom
applications.