Videk 2030 Stud Sensor User Manual


 
K11020 VisionSensor™ 2030 User Manual, Rev. E, Software ver. 3.1.1000, August 3, 2007 - 13
Save Settings
1.7 - Reader Feedback Guide
The chart below shows potential icon combinations. Consult the chart to verify a conguration.
Possible VS 2030 Congurations
RS232 USB
RS232 One Way Mode
This mode is the standard way of transferring unformatted,
unpacketized data through the serial/RS232 port.
USB One Way Mode
This mode is the standard way of transferring unformatted,
unpacketized data through a USB port.
RS232 Two Way Mode
This mode allows for reliable communication by utilizing
packet acknowledgement protocol.
USB Two Way Mode
This mode is utilized when there is a need for packetized,
bidirectional communication between the VS 2030 and an ap-
plication through a USB port.
USB Keyboard Mode
This mode emulates the transfer of data from the VS 2030 to
a host computer via a keyboard interface.
RS232 Secure Mode
This mode is utilized for transferring data in an encrypted
format from the VS 2030 to a host computer through the
serial/RS232 port.
USB Virtual COM Port 1
Mode
This mode allows communi-
cation between a USB port
and an application expect-
ing serial input. A virtual
com driver must be loaded
onto the host computer be-
fore reader can be utilized
in this mode. ** See Note.
USB Secure Mode
This mode is utilized for transferring data in an encrypted for-
mat from the VS 2030 to a host computer through a USB port.
USB Downloader Mode
This mode is used when downloading rmware changes to
the reader.