Filter
Top Products
K11020 VisionSensor™ 2030 User Manual, Rev. E, Software ver. 3.1.1000, August 3, 2007 - 48
Save Settings
5.4 - VGA & Megapixel Settings
User’s may optimize the VS 2030’s megapixel (SXGA) imager (1280 x 1024) to VGA (640 x 480). This
feature is used to decrease the pixel sampling area, which will greatly increase processing speed. This is
an advanced feature used for the rapid decoding of 1-dimensional/linear codes and larger module size 2-
dimensional codes. Videk recommends testing this feature, as it will not work well with many high density
codes.
Enable VGA - 640 x 480 Enable SXGA - 1024 x 1280 Enable DOT (Default)
5.5 - Mirror Decoding
Scan the following codes to enable/disable the mirroring feature:
On Off (Default)
Note: The Mirroring feature allows the VS 2030 to read codes as they are seen through a mirror (in-
versed 180°). If the Mirroring feature is enabled, all other code reading ability will be disabled.