Filter
Top Products
K11020 VisionSensor™ 2030 User Manual, Rev. E, Software ver. 3.1.1000, August 3, 2007 - 8
Save Settings
1.6.2 - USB Cable Installation Guide
To connect the VS 2030 to your host computer via USB interface:
1. Make sure the USB cable is sufciently attached to your VS
2030 unit.
2. You DO NOT need to power off your host computer. The VS
2030 with USB interface can be plugged into any host while
the computer is powered up.
3. Connect the USB interface cable to the host. If you are
unsure of the proper location to connect the USB cable please
consult the manual of your host computer.
4. The USB interface does not require additional power supply.
The VS 2030 will automatically recharge the battery whenever
the unit is attached to a host that is powered up.
5. The VS 2030 will power on automatically.
6. Your VS 2030 unit should be ready for use. Open the applica-
tion on your host computer to which you wish to send data
and begin scanning.