Filter
Top Products
K11020 VisionSensor™ 2030 User Manual, Rev. E, Software ver. 3.1.1000, August 3, 2007 - 14
Save Settings
To read a symbol with the VS 2030:
1. The VS 2030 features omnidirectional decoding. Center the symbol in any orientation within the laser
dot aiming pattern.
Note: The VS 2030 can read a symbol that is not centered; however, the VS 2030 performs best
when a code is centered. If two (2) bar codes are with the imagers decode zone, the VS 2030 will
decode the symbol closest to the center of the aiming dot.
2. The VS 2030 was developed to decode both very small 2-dimensional symbols and larger 1-dimen-
sional symbols. The unit has an innovative dual eld decode zone. The VS 2030 DECODES BOTH
ZONES SIMULTANEOUSLY. The unit has a lens focused on a near-eld for smaller codes (optimal
focal point is 4 inches) and one lens focused on a far-eld for larger codes (optimal focal point 9
inches). To read smaller symbols move the VS 2030 closer to the symbol. To read larger symbols
move the unit farther away from the symbol. The entire VS 2030 decode zone varies between two
(2”) and twenty (20+”) or more inches. For postal codes the range is between eight (8”) and ten
(10”) inches.
3. Hold the VS 2030 steady - DO NOT SWIPE OR MOVE THE READER. Press the trigger until the VS
2030 beeps, indicating the code has been successfully decoded.
4. The reader may be optimized to your specic environment by scanning codes in Chapter 2.
1.8 - Targeting and Reading Techniques
The VS 2030 utilizes digital camera technology to take a picture of a symbol. Once an image is captured, the
VS 2030 utilizes advanced decoding algorithms to extract data from the captured image.
The VS 2030 features left and right triggers (the
red buttons on the top of the reader). These
triggers may be programmed to perform various
features. The reader is shipped with the left trigger
and right trigger functioning as a decode symbol
command.
The handle has a trigger on the grip. The two
triggers on the top of the unit also work when the
handle is attached.