Videk 2030 Stud Sensor User Manual


  Open as PDF
of 98
 
K11020 VisionSensor™ 2030 User Manual, Rev. E, Software ver. 3.1.1000, August 3, 2007 - 50
Save Settings
6.1 - Prex Settings
If you scan the following codes, you will lose any unsaved settings. Make sure to save settings on your
reader before scanning the prex codes. If you scan more than one prex you will receive each scanned
prex in your scanned data; (i.e., if you scan comma prex twice, you will get two comma prexes). Scan
the following codes to set appropriate prex:
Prex - Comma Prex - Space Prex - Tab (USB Mode)
Prex - Tab Prex - Erase Prex - Carriage Return Line Feed
Note: If you require a special conguration, please contact Videk at (585) 292-6210 or (800) 24-VIDEK.
6.2 - Sufx Settings
If you scan the following codes, you may lose your current settings. Make sure to save settings on your
reader before scanning the Sufx codes. If you scan more than one sufx you will receive each scanned
sufx in your scanned data; (i.e., if you scan comma sufx twice, you will get two comma sufxes). Scan
the following codes to set appropriate sufx:
Sufx - Carriage Return Sufx - Comma Sufx - Line Feed
Sufx - Carriage Return Line Feed Sufx - Space Sufx - Enter
Only Use with
Serial Applications
Only Use with
Serial Applications
Only Use with
Serial Applications
Only Use with
USB or Keyboard
Mode
Only Use with
Serial Applications
This code will
erase all prex
data.
 previous next