3 - 32
No. 99MBC032A
PROG
1
PROG
2
PROG
.
PROG
3
PROG
5
4
↓
1) Each time the numeric key is pressed
the corresponding digit will be
placed in the position of the least
significant digit, as shown in the
figure on the right. In this example
insignificant zeros (
0 0
) are
not entered, they will be automati-
cally added to fill the remaining digit
places when the
ENT
key is
pressed.
PROG
ENT
2) Press the
ENT
key to save the setup
data of the lower limit value, and
return to the ready state.
If “Inserting a comma (,) after the
thousandth digit” is specified in the
basic setup, it will be automatically
inserted when the
ENT
key is
pressed.
PROG
Step 8: As in steps 6 and 7, enter a new upper limit value.
PROG
Step 9: If the
ENT
key is pressed, the setup data of the
upper limit value is saved in memory, then
operation returns to the ready state.
PROG
Step 10:Here, for practice, intentionally enter the incorrect
upper limit value of “12.34800” then correct it.
PROG
Step 11:Enter the setup mode for the upper limit value
again.
PROG
1) Press the key twice to make the third
digit flash.
PROG
2) Press the key twice to change the third
digit to “6”.
PROG
3) Press the
ENT
key to save the setup data. The
operation will be automatically return to the
ready state.
