A SERVICE OF

logo

Open as PDF
next previous
4 - 6
No. 99MBC032A
e. Setting the display latch timer (Guidance: )
Set the period the measurement result display is to be latched (held) on the display if a
single-run measurement or continuous-run measurement is performed. Specify a value
between 0 and 99 seconds. “0” seconds specifies an infinite (latch state not canceled).
(Default setting: 10 seconds)
PROG
PROG
1
PROG
5
PROG
ENT
Step 1: This is an example of the display latch timer being
set to 15 seconds.
Enter
1
and
5
in this order.
Step 2: Press the
ENT
key to save the setup data in
memory.
The operation automatically proceeds to B1:
Setting the output function in the ready state.