4 - 8
No. 99MBC032A
d. Selecting the averaging method (Guidance: )
Select one of the following averaging methods: arithmetical average and moving average.
: Arithmetical average
: Moving average
(Default setting: )
PROG
Step 1: Each time the key is pressed the displayed
setup option toggles between
and
. While the desired setup option is
flashing, press the
ENT
key. The operation
automatically proceeds to the selection of the GO/
NG judgment method.
e. Setting the GO/NG judgment method (Guidance: )
Select one of the following GO/NG judgment methods: (lower limit value and upper limit
value), (multi-stage selection: 7 stages), and (target value + tolerance).
: GO/NG judgment is performed according to the specified lower limit and
upper limit.
: GO/NG judgment is performed according to the multi-limit selection (7
stages).
: GO/NG judgment is performed according to the specified target value and
tolerance.
(Default setting: )
PROG
Step 1: Each time the key is pressed the displayed
setup option changes in the following order:
→ → . While
the desired setup option is flashing, press the
ENT
key. If is selected, operation
proceeds to setting whether the target value is
copied to the reference value. If is not
selected, operation proceeds to B2: Setting the
workpiece type.
f. Setting whether the target value is copied to the reference value (Guidance: )
Set whether the target value is automatically copied to the reference value.
: Target value is not copied to the reference value.
: Target value is copied to the reference value.
(Default setting: )
PROG
Step 1: Each time key is pressed the displayed
setup option toggles between and
. While the desired setup option is
flashing press
ENT
key. The operation automati-
cally proceeds to setting B2: Setting the
workpiece type.
