Agilent Technologies 8922 P Welder User Manual


 
6 Chapter2
Setting up the HP/Agilent 8922 GSM HSCSD Test System
Before you start
Before you start
WARNING The HP/Agilent 8922 is a Safety Class 1 product (provided with a
protective earth terminal). A safety earth ground must be
provided from the mains power source to the product input
wiring terminals, power cord, or supplied power cord set.
Whenever it is likely that the protection has been impaired, the
HP/Agilent 8922 GSM HSCSD Test System must be made
inoperative and be secured against any unintended operation.
WARNING If the HP/Agilent 8922 is to be energized via an external
autotransformer for voltage reduction, make sure that the
common terminal is connected to the neu tral pole of the power
source.