Filter
Top Products
52 Chapter5
Remote operation
HSCSD Subsystem GPIB Commands
HSCSd:MASTer:UPLink:AMPLitude
Description This sets the expected input level of the master TCH. In standard mode,
this sets the master’s uplink amplitude control to MANUAL. In
compatibility mode, if the master’s uplink amplitude control is set to MS
TX LEV then an error message Can’t change setting while MS TX
Lev mode is selected. occurs and the setting is not performed.
If the measurement timeslot is set to Master, the analyser level of the
unit is set to this value.
Syntax HSCSd:MASTer:UPLink:AMPLitude?
HSCSd:MASTer:UPLink:AMPLitude <real> <units>
Command options
Type float
Units: dBm only
Limits (GSM900): -27.0 thru +41.0
Limits (E-GSM): -27.0 thru +41.0
Limits (DCS1800): -47.0 thru +33.0
Limits (PCS1900): -47.0 thru +33.0
Default (compatibility mode): 33.0
Default (GSM900) 13.0
Default (E-GSM): 13.0
Default (DCS1800): 10.0
Default (PCS1900): 10.0