Filter
Top Products
8 Chapter2
Setting up the HP/Agilent 8922 GSM HSCSD Test System
Making the front panel connections
Making the front panel connections
Before you connect the two HP/Agilent 8922 P systems together to form
the HP/Agilent 8922 GSM HSCSD Test System, ensure that both HP/
Agilent 8922 P systems are connected and calibrated as described in the
HP/Agilent 8922 Multi-Band Test System Supplementary User’s Guide.
For details on the HP/Agilent 8922P front panel connections, see the HP
8922 Multi-Band Test System Supplementary User’s Guide.
The RF flow must be combined and split between the two HP/Agilent
8922P systems. This is done by connecting the supplied RF link cable
(08922-61185) between the Coupled RF Port on the dual band HP/
Agilent 83220 of the master unit and the GSM/DCS/PCS RF In/Out port
on the HP/Agilent 83220 of the slave unit.
Figure 2-1 Front panel connections
Connect mobile here RF link cable
Master Slave