Filter
Top Products
32 Chapter4
Screens
HSCSD screen
7. Data rate
The Data rate field determines the data rate associated with the
HSCSD 2x2 call. Selecting '9.6' sets up a call at 9.6 kbit/s per timeslot
(19.2 kbit/s) and selecting '14.4' sets up a call at 14.4 kbit/s per timeslot
(28.8 kbit/s).
NOTE The value of the Data rate field can not be changed while a call is in
progress.
8. Measure
The Measure field sets which of the uplink TCHs are to be measured or
demodulated. The display updates (next to the Mobile reports and
Peak Power displays) to show which timeslot is being analyzed.
The Measure field also selects which analyzer level to use, either the
Master input level (see page 34) or the Slave input level (see
page 36).
NOTE The default is reset when you select the instrument type (see page 24).
Type Toggle
Units None
Choices “9.6” or “14.4”
Default “9.6”
Type Toggle
Units None
Choices “Master” or “Slave”
Default (slave unit) “Slave”
Default (other units) “Master”