Filter
Top Products
56 Chapter5
Remote operation
HSCSD Subsystem GPIB Commands
HSCSd:SLAVe:STATus:SYNC
Description This read-only field indicates whether or not the slave unit is
synchronised with the master unit. The status is set to DISABLED when
you set the instrument type to HSCSD SLAVE. This must be done before
configuring the master unit. When the master unit is configured as
HSCSD MASTER, a frame reset is sent from the master unit to the slave
unit. Upon receiving this reset, the slave unit starts to generate a TCH,
and the sync status field changes to ENABLED.
Syntax HSCSd:SLAVe:STATus:SYNC?
Command options Not applicable.