Filter
Top Products
Chapter 5 49
Remote operation
HSCSD Subsystem GPIB Commands
HSCSd:MASTer:STATus:TCH:TSLot
Description Setting this during a call changes the master timeslot. Note that existing
timeslot commands sent to a master or single unit have the same effect.
When the system is idle (that is, not on a call) this sets the timeslot
which will be used when the next command is established. In a multi-box
system, this command must also be sent to the slave unit.
Note that the slave timeslot is always the slot following the master.
Consequently, in a multi-box system, the slave needs to know only the
master timeslot.
Syntax HSCSd:MASTer:STATus:TCH:TSLot <integer>
HSCSd:MASTer:STATus:TCH:TSLot?
Command options
Type integer
Units: none (timeslot)
Limits: 2 thru 5
Default: 4