Filter
Top Products
3-12
Cisco Personal Assistant 1.4 Installation and Administration Guide
OL-4590-03
Chapter 3 Configuring Cisco CallManager for Personal Assistant
Configuring Cisco Unity in Cisco CallManager for Integration with Personal Assistant
Configuring Cisco Unity in Cisco CallManager for Integration
with Personal
Assistant
When adding Cisco Unity to Cisco CallManager, and setting the calling search space that you use for
voice mail ports and for message waiting indicators, ensure that it contains the PAManagedEmployees
partition, but not the PA partition. Otherwise, the message waiting indicators will not work.
You assign partitions and calling search spaces to voice mail ports on the Feature > Voice Mail > Cisco
Voice Mail Port > Voice Port Configuration page of the Cisco CallManager Administration interface.
You use the Cisco CallManager Administration interface to assign partitions and calling search spaces
to message waiting indicators in one of the following ways:
• On the Feature > Voice Mail > Message Waiting > Message Waiting Configuration page.
• On the Service Parameters Configuration page by going to Service > Service Parameters, and
clicking Cisco Messaging Interface for the applicable server. Set the calling search spaces on the
Service Parameters Configuration page only when a simplified message desk interface
(SMDI)-compliant external voicemail system is used.
Refer to the documentation included with Cisco Unity and Cisco CallManager for detailed instructions
on integrating Cisco
Unity with Cisco CallManager.