Filter
Top Products
Model G0773 (Mfd. Since 12/14)
-57-
SECTION 6: ACCESSORIES
ACCESSORIES
Installing unapproved accessories may
cause machine to malfunction, resulting in
serious personal injury or machine damage.
To reduce this risk, only install accessories
recommended for this machine by Grizzly.
NOTICE
Refer to our website or latest catalog for
additional recommended accessories.
T10294—11 Pc. Carbide Bit Set
1
⁄2"
This
1
⁄2" shank, 7-piece turning tool set is ideal
for a wide variety of projects. Supplied with right
hand and left hand turning/facing tool holders, the
set is complimented with one threading and one
cut-off tool, too. Indexable inserts ensure cutting
surfaces stay sharp.
order online at www.grizzly.com or call 1-800-523-4777
H2987—½" Bent Lathe Dog
H2988—1" Bent Lathe Dog
H2989 —1½" Bent Lathe Dog
H2990—2" Bent Lathe Dog
H2991—3" Bent Lathe Dog
Figure 96. Model T10294 7-Pc. carbide-tipped
tool set.
Figure 97. Model H2990
1
⁄2" Bent Lathe Dog.
SB1365—South Bend Lathe Way Oil, 12 oz.
T23962—ISO 68 Moly-D Way Oil, 5 gal.
T23963—ISO 32 Moly-D Machine Oil, 5 gal.
T23964—Moly-D NLGI#2 Grease.
Moly-D oils are some of the best we've found for
maintaining the critical components of machinery
because they tend to resist run-off and maintain
their lubricity under a variety of conditions—as
well as reduce chatter or slip. Buy in bulk and
save with 5-gallon quantities.
Figure 98. 12 oz. way oil & 5 gallon machine oil.
SB1235 T23963
T23964