Filter
Top Products
Model G0773 (Mfd. Since 12/14)
-63-
Bedways
Lube Type . . Model SB1365 or ISO 68 Equivalent
Lube Amount ..................................... As Needed
Lubrication Frequency ................................. Daily
Before lubricating the bedways (see Figure 114),
clean them with mineral spirits. Apply a thin coat
of oil along the length of the bedways. Move the
steady rest, carriage, and tailstock to access the
entire length of the bedways.
Leadscrew & Carriage Rack
Lube Type . . Model SB1365 or ISO 68 Equivalent
Lube Amount ..................................... As Needed
Lubrication Frequency ................................. Daily
Before lubricating the leadscrew and carriage
rack (see Figure 114), clean them first with min-
eral spirits. Use a stiff brush to help remove any
debris or grime. Apply a thin coat of oil along the
entire length of the carriage rack. Use a stiff brush
to make sure oil is applied into the leadscrew
threads.
Note: In some environments, abrasive material
can become caught in the leadscrew lubricant and
drawn into the half nut. In this case, lubricate the
leadscrew with a quality dry lubricant.
Figure 114. Identification of leadscrew, rack, and
bedways for lubrication.
Bedways
RackLeadscrew
Figure 112. Tailstock and leadscrew end ball
oilers.
Figure 113. End gear ball oilers.
Refer to Figures 111–113 to find the location of
each ball oiler.
Figure 111. Apron ball oilers.