Filter
Top Products
-14- G0501 Sliding Table Saw
9. Blade Guard—Fully-adjustable blade guard
allows high visibility of the cutting operation
while maintaining maximum protection
around the saw blade.
10. Upper Dust Collection Port—2" port open-
ing allows effective dust extraction from
above the cutting operation.
11. Main Dust Collection Port—5" port allows
efficient high-volume dust extraction from
below the cutting operation.
13. Main Blade—Performs the cutting opera-
tions.
14. Scoring Blade—Small cutting blade that
rotates opposite the main saw blade. The
blade scores the workpiece before the actu-
al cutting operation is performed; thus, pre-
venting tear-out in laminate materials. The
scoring blade is adjustable forward and
backward, up and down, and in thickness of
kerf.
9
10
11
12
13
14
12. Rip Fence Scale—Allows precise measure-
ment of rip cutting operations. Features a
dual calibration block for effortless scale
reading regardless of whether the fence is in
the high or low position.
Figure 5. Blade guard and dust ports.
Figure 7. Blades.
Figure 6. Rip fence scale.