Filter
Top Products
G0501 Sliding Table Saw -37-
NOTICE
The following section was designed to give
instructions on the basic operations of this
machine. However, it is in no way compre-
hensive of all of the machine’s applications.
WE STRONGLY RECOMMEND that you read
books, trade magazines, or get formal train-
ing to maximize the potential of your
machine.
Damage to your eyes, lungs, and ears could
result from using this machine without prop-
er protective gear. Always wear safety glass-
es, a dust mask, and hearing protection
when operating this machine.
Loose hair and clothing
could get caught in
machinery and cause
serious personal injury.
Keep loose clothing and
long hair away from mov-
ing machinery.
Operation Tips
Your safety is important. The tips below are
intended to supplement Section 2: Safety. But
remember, no safety list can be comprehensive
of every situation. The operator is ultimately
responsible for their own safety, as well as the
safety of bystanders. Every cutting operation is
uniquely different and may require safety equip-
ment or safety procedures not mentioned in this
manual.
Please follow these tips EVERY time you use
your saw:
• Stand to the left of the blade line-of-cut when
performing a cutting operation.
• Turn off the saw and allow the blade to come
to a complete stop before removing the cut-
off piece.
• Make sure that the riving knife is always
aligned with the main blade before cutting!
• Always position the blade guard to the cor-
rect height above the workpiece.
• Carefully plan each cutting operation to avoid
injuries.
• When you release the sliding table lock,
make sure that the knob is positioned so that
it will not lock the table during a cut.
SECTION 6: OPERATIONS