Filter
Top Products
Page 22SKU 96067
For technical questions, please call 1-800-444-3353.
TO MOUNT THE MACHINE ONTO THE STAND
Attach the Support Bracket to the Stand, using four Hex Head Bolts, four Spring
Lock Washers, and four Hex Nuts. (See Figure D and Assy. Diagrams, pages 37,
39.)
Step on the Footwheels to lower the Casters. Then move the Stand parallel to the
Machine. Step on the Footwheels twice more to raise the Casters to keep the Stand
from moving. (See Figure G and Assy. Diagrams, pages 37, 39.)
With assistance and a proper lifting device, lift the Machine onto the Stand.
Attach the Tailstock Support Bracket to the Stand.
(See Figure G and Assy. Diagrams, pages 37, 39.)
Remove the two shipping Bolts, and install the two Lock Knobs on the Powerhead
Support Bracket. (See Figure G and Assy. Diagrams, pages 37, 39.)
Install the Lock Knob on the Tailstock Support Bracket. (See Figure G and Assy.
Diagrams, pages 37, 39.)
1.
2.
3.
4.
5.
6.
FIGURE F
FIGURE G
Foot Wheel (109)