Filter
Top Products
Page 25SKU 96067
For technical questions, please call 1-800-444-3353.
TO ASSEMBLE THE MAIN TABLE
Set the Table upside down with the Trunnion and its degree scale toward you.
(See Figure K and Assy. Diagram, page 46.)
Install the second Trunnion Lock and Washers from the provided Accessory
Pack.
(See Figure K and Assy. Diagram, page 46.)
Loosen the Table Setscrews and insert the Legs into the Saw Table with the rack
teeth facing left. (See Figure K and Assy. Diagram, page 46.)
Finger-tighten the Setscrews. The Screws will hold the Legs in the casting, but
will be loose enough for nal adjusting.
(See Figure K and Assy. Diagram, page 46.)
1.
2.
3.
4.
FIGURE K