Filter
Top Products
Page 23SKU 96067
For technical questions, please call 1-800-444-3353.
FIGURE H
TO ATTACH A SAW BLADE TO THE ARBOR
Insert the 3/4” Collet into the Spindle. Rotate the Collet until you feel its Keyway
slot engages the Spindle Key.
(See Figure I, next page and Assy. Diagram, page 42.)
Insert the Drawrod into the Powerhead, and rotate the Drawrod until it catches
the threads of the Collet. (See Figure I, next page and Assy. Diagram, page
42.)
Insert the Saw Arbor into the Collet, and tighten the Drawbar to secure the Arbor
in the Collet. (See Figure I, next page and Assy. Diagram, page 42.)
With the Saw Teeth pointing toward the front of the Powerhead (toward the
operator), place the Saw Blade on the Arbor. Then place the Spacer on the
Arbor.
(See Figure I, next page and Assy. Diagram, page 42.)
Install the Nut on the Arbor, and rmly tighten with a wrench.
(See Figure I, next page and Assy. Diagram, page 42.)
1.
2.
3.
4.
5.
TO ASSEMBLE THE LATHE TOO REST
Insert the Tool Rest Post into the Arm. Then tighten the Socket Setscrew using an Allen
Wrench (not included). (See Figure H and Assy. Diagrams, pages 44, 55.)