Filter
Top Products
CHAPTER 13
Effect Mode Options Descriptions
DL.3 Digital Light User Manual 175
NOTE: This option is also available as a Visual Mode adjusted with 2 Modifier
parameters, (see
Texture Mixing on page 99).
Texture Ripple, Asymmetrical Circular
Effect Mode parameter DMX value = 25
This option varies the distance of reference points to the applied media file texture around the z-
axis without affecting the underlying object to create an effect of wavy ripples moving out from
the object’s center.
Modifier 1: Adjusts the size (amplitude) of the ripple from 0 = no adjustment to 255 (100%) =
maximum size.
Modifier 2: Adjusts the rate (frequency) of the ripple from 0 = no adjustment to 255 (100%) =
maximum rate
Modifier 3: Adjusts the offset (phase) speed and direction. A DMX value of 128 (50%) = no
adjustment. DMX Values above the midpoint increase speed in a forward direction to 255
(100%) = fastest speed. DMX values below the midpoint increase speed in a backward direction
from no adjustment to 0 = fastest speed.
Texture Ripple, Circular
Effect Mode parameter DMX value = 24
This option varies the distance of reference points to the applied media file texture around the
z-axis without affecting the underlying object. This creates an effect of concentric rippling out
from the object center.
Modifier 1: Adjusts the size (amplitude) of the ripple from 0 = no adjustment to 255 (100%) =
maximum size.
Modifier 2: Adjusts the rate (frequency) of the ripple from 0 = no adjustment to 255 (100%) =
maximum rate
Modifier 3: Adjusts the offset (phase) speed and direction. A DMX value of 128 (50%) = no
adjustment. DMX Values above the midpoint increase speed in a forward direction to 255
(100%) = fastest speed. DMX values below the midpoint increase speed in a backward direction
from no adjustment to 0 = fastest speed.
Object Effect Global Effect
Object Effect Global Effect