Filter
Top Products
CHAPTER 3
The Digital Light Menu System
32 DL.3 Digital Light User Manual
Setting the Projector In By DMX field to Yes sets DMX as the projector’s input source. The
Projector Lamp field lets you manually turn the lamp On or Off.
Use the Projector Powerup field to choose the control option for turning the lamp on. The
options are: Always On, Manual, and DMX. This only takes effect when the fixture powers up.
• Always On turns the projector lamp on when the fixture starts up regardless of whether
there is a DMX/Art-Net signal. If there is no DMX/Art-Net signal the lamp shuts off when the
shutdown timeout period expires.
• Manual turns on the projector lamp only when set to On via DMX, Menu or the CMA.
• DMX only turns the lamp on when it receives a DMX signal or Art-Net signal connected
to it.
When the internal projector menu is selected for display, you may need to manually adjust the
zoom and /or focus parameters to view the display clearly. The Zoom Override and Focus
Override options override the DMX values sent by the console and allow you to control Zoom
and focus manually with a DMX decimal value between 0-255.
Projector Ceiling rotates the image 180 degrees so you can adjust for whether the fixture is
hung in the air or sitting on the floor.
Projector Rear projects a mirror invert of the image for rear-screen projection applications.
Projector Control Menu
can be set to On to display
the projector’s menu
system. In this
state, the
directional front panel
buttons (multi-directional
switch and the buttons on
either side of it) control the
projector menu rather than
the LCD menu.
To revert back to the Menu
display, press one of the six
side menu buttons.
When the Projector Control Menu is set to Off, the projector control menu is not displayed.
Turning Projector Defaults On will reset all the options on the Projector tab to their factory
default settings. For more information, refer to the Projector User Manual that shipped with your
fixture.
Projector Menu
Command
Default
Projector Menu
Command
Default
LANGUAGE ENGLISH
POWER
MANAGEMENT
OFF
CEILING OFF LOGO OFF
REAR OFF ON START OFF
INPUT3 SVIDEO FANSPEED NORMAL
SYSTEM AUTO LAMP_MODE NORMAL
INPUT1 RGB DISPLAY OFF
SCREEN NORMAL BLUE_BACKGROUND OFF
INPUT2 RGB R_CODE 001