Filter
Top Products
31. Re-attach the positive output terminal cable.
32. Attach the cable retainer to the fuel tank rail. Set
the fuel tank into position on the rails and secure it
with the four bolts, washers, and nuts.
33. Attach the fuel return line at the top of the fuel
tank. Remove the plug from the fuel line and
attach it to the fuel bowl.
34. Perform the replacement procedures according to
each of the following:
Alternator Stator Removal and Replacement
Alternator Rotor Removal and Replacement
Before installing the machine case top and sides,
be sure to replace any cable ties cut during disas-
sembly.
TROUBLESHOOTING & REPAIR
F-46 F-46
SA-250
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
GENERATOR FRAME REMOVAL
AND REPLACEMENT (continued)