Filter
Top Products
WELDING CAPABILITY
The SA-250 is rated 250 amps, 40 volts constant cur-
rent DC at 60% duty cycle based on a ten minute time
period. Longer duty cycles at lower output currents are
possible.
The current is continuously variable from 40 to 325
amps DC.
LIMITATIONS
• The SA-250 is not recommended for any processes
besides those that are normally performed using DC
stick welding (SMAW) and DC TIG welding. Specific
limitations on using the SA-250 for these processes
are described in the
Welding Operation
section of
this manual. Constant voltage welding is available
with the optional Wire Feed Module.
OPERATION
B-4 B-4
SA-250
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC