Lincoln Electric SVM128-A Welder User Manual


 
OPTIONS/ACCESSORIES
The following options/accessories are available for
your SA-250 from your local Lincoln Distributor.
Trailer (K913) - Two-wheeled trailer for in-plant and
yard towing. Various hitches and accessories are
available. For highway use, consult applicable federal,
state, and local laws.
Power Plug Kit (K802-C) - Provides a plug for each
auxiliary receptacle.
Ether Start Kit (K793-1) - Automatic ether start kit pro-
vides cold weather starting assistance in temperatures
below 10
o
F (-12.2
o
C). Requires an ether tank that must
be purchased locally. “Thermostart” system must be
removed.
NOTE: Ether starting can contribute to shortened
engine life. Avoid unnecessary or indiscriminate use.
Linc Thaw™ Control Unit (L2964-5) - Includes meter
and fuses to protect the welder when thawing frozen
water pipes.
PIPE THAWING can result in fire, explosion, damage
to pipes, wiring, and the welder as well as other unsafe
or hazardous conditions. Do not use a welder to thaw
pipes before reviewing Lincoln Bulletin E695.1 (dated
October 1987 or later).
Wire Feed Module - (K623-1) - Provides constant
voltage output for semiautomatic welding. Includes
remote for CV mode and internal “Cold Tip Contactor.”
Accessory Kit (K703) - Includes the following:
• Electrode cable
• Work cable
• Headshield
• Work clamp
• Insulated electrode holder
Remote Control - (K924-1) - Includes a receptacle
switch and control box with 100 ft. (7.5 meters) of 4-
conductor cable. Allows fine current and OCV to be
controlled remotely.
GFCI Receptacle Kit (K896-2) - Includes a UL
approved 115 volt ground fault circuit interrupter recep-
tacle (duplex type) with covers and installation instruc-
tions. Each half of the receptacle is rated 15 amps, but
the maximum total current from the GFCI duplex is lim-
ited to 20 amps. The GFCI receptacle replaces the
factory installed 115 volt duplex receptacle.
ACCESSORIES
C-2 C-2
SA-250
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
WARNING