Filter
Top Products
OPERATION
B-3 B-3
RANGER® 3 PHASE
“ RANGE” SWITCH
The “Range” switch is used to select one of three
amperage ranges with generous overlap for Stick/TIG
welding, or one Wire Feed welding range.
Never change the “RANGE” Switch setting while
welding. This will damage the switch.
------------------------------------------------------------------------
“ CONTROL” DIAL
Provides a fine welding current adjustment within the
Range Switch settings in the STICK mode and welding
voltage control with the Range switch set in the wire
feed mode.
Process Range Setting Current Range
POLARITY SWITCH
Provides three selectable welding polarities:
AC, DC+ & DC-
Never change the Polarity switch setting while welding.
This will damage the switch.
------------------------------------------------------------------------------------------------
CAUTION
CAUTION
STICK/TIG
(constant current)
(3 range settings)
WIRE FEED
(constant voltage)
(one range setting)
90 Max.
145 Max.
210DC/225AC Max.
15 to 25V
50 to 90 Amps
70 to 145 Amps
120 to 210 (DC) 225(AC)
Up to 200 Amps
RANGER® 3 PHASE APPROXIMATE FUEL CONSUMPTION
KOHLER
CH20S or CH23S
.35 Gallons/Hour
(1.34 Liters/Hour)
.76 Gallons/Hour
(2.86 Liters/Hour)
1.23 Gallons/Hour
(4.64 Liters/Hour)
1.38 Gallons/Hour
(5.21 Liters/Hour)
1.22 Gallons/Hour
(4.60 Liters/Hour)
1.52 Gallons/Hour)
(5.77 Liters/Hour)
1.64Gallons/Hour)
(6.23 Liters/Hour)
Low Idle - No Load
2200 RPM
High Idle - No Load
3700 RPM
AC CC Weld Output
225 Amps @ 25 Volts
DC CC Weld Output
210 Amps @ 25 Volts
DC CV Weld Output
200 Amps @ 20 Volts
Auxiliary Power Single Phase
9,500 Watts
Auxiliary Power 3 Phase
10,500 Watts
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC