Filter
Top Products
ACCESSORIES
C-2 C-2
RANGER® 3 PHASE
OPTIONAL EQUIPMENT (Field Installed)
K957-1 HEAVY DUTY, TWO WHEEL TRAILER FOR
SMALL WELDERS - For road, off-road and in-plant
and yard towing. (For highway use, consult applicable
federal, state and local laws regarding requirements for
brakes, lights, fenders, etc.)
Order K957-1 Trailer
K958-1 Ball Hitch
K958-2 Lunette Eye Hitch
K959-2 Fender & Light Kit
K965-1 Cable Storage Rack
K889-2 & -3 TWO-WHEEL UNDERCARRIAGE - For
moving by hand. Overall Width 29 in (.74m) Both have
pneumatic tires. Puncture proof tires included with
K889-3.
K1737-1 FOUR WHEEL ALL-TERRAIN UNDERCAR-
RIAGE - For moving by hand at construction sites.
Heavy duty puncture resistant pneumatic tires.
K1770-1 UNDERCARRIAGE (FACTORY) - For mov-
ing by hand on a smooth surface. One or two gas cylin-
ders can be mounted on the rear of the undercarriage
with the installation of K1745-1 Cylinder Holder(s).
Heavy duty puncture resistant pneumatic tires and
front caster.
K1745-1 WELDING GAS CYLINDER LPG TANK
HOLDER
Holds Welding Gas Cylinder for use on K1770-1
Undercarriage. One or two may be installed on an
undercarriage.
K1788-1 ROLL CAGE - Gives added damage protection.
Attaches to K1737-1, K1770-1, and K957-1.
K886-1 CANVAS COVER -To protect the RANGER 3
PHASE when not in use. Made from attractive red can-
vas material which is flame retardant, mildew resistant,
and water repellent.
K802R POWER PLUG KIT- provides four 120V plugs
rated at 15 amps each and one dual voltage, Full KVA
plug rated at 120/240V, 50 amps.
K802N POWER PLUG KIT - Provides four 120V plugs
rated at 20 amps each and one dual voltage, full KVA
plug rated at 120/240V, 50 amps.
K704 ACCESSORY KIT - Includes 35 ft (10.7m) 2/0 AWG
electrode cable, 30 ft. (9.1m) 2/0 AWG work cable, head-
shield Filterplate, work clamp and electrode holder. 400 Amp.
Capacity.
K875 ACCESSORY KIT - Includes 20 ft (6.1m) #6 electrode
cable, headshield, filter plate, work clamp , electrode holder
and sample pack of mild steel electrodes 150 Amp. Capacity.
lug, 15ft. (4.6) #6 work cable
K894-1 SPARK ARRESTER KIT - Includes a heavy gauge
steel, approved spark arrester and clamp for easy mounting
to muffler exhaust pipe.
K1816-1 FULL KVA ADAPTER KIT - Plugs into the
120/240V NEMA 14-50R receptacle on the case front (which
accepts 4-prong plugs) and converts it to a NEMA 6-50R
receptacle, (which accepts 3-prong plugs.)
T12153-9 FULL-KVA POWER PLUG - One dual voltage
plug rated at 120/240V, 50 amps.
K930-2 TIG MODULE - Provides high frequency and shield-
ing gas control.for AC and DC GTAW (TIG) welding applica-
tions. Its compact case is designed foe easy carrying, com-
plete with a handle. High frequency bypass is built in
Requires K938-1 Contactor Kit, K936-4 Control Cable, and
K814 Arc Start Switch.
K938-1 CONTACTOR KIT - For use with TIG Module,
Provides a “cold” electrode until the triggering device (Arc
Start Switch) is pressed.
K936-4 CONTROL CABLE - Connects TIG Module to
RANGER 3 PHASE. (9 Pin to 115V Plug)
K814 ARC START SWITCH - Attaches to the TIG torch for
convenient finger control.
K937-45 CONTROL CABLE EXTENSION - Allows TIG
Module to be operated at distances up to 200ft. from the
power source. Available in 45ft. (13.7m) Sections.
K939-1 DOCKING KIT - For Mounting the K930-2 TIG
Module on top of the RANGER 3 PHASE.
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC