Filter
Top Products
ACCESSORIES
C-3 C-3
RANGER® 3 PHASE
RECOMMENDED EQUIPMENT
STICK
K704 Accessory Kit which includes:
• Electrode Holder & Cable
• Work Clamp & Cable
• Headshield
WIRE FEED
LN-25
K449 LN-25 - Includes internal contactor for across the
arc operation (no control cable). Provides “cold” elec-
trode until gun trigger is pressed. Includes gas sole-
noid. Requires Drive Roll Kit and Weld Power Cable.
Magnum Gun and Magnum Gun Connector Kit are
required for gas-shielded welding. Innershield Gun is
required for gasless welding.
LN-15
K449 LN-15 - Includes internal contactor for across the
arc operation (no control cable). Provides “cold” elec-
trode until gun trigger is pressed. Includes gas sole-
noid. Requires Drive Roll Kit and Weld Power Cable.
Magnum Gun and Magnum Gun Connector Kit are
required for gas-shielded welding. Magnum Innershield
Gun and wire bushing is required for gasless welding.
TIG
PRO TORCH
®
TIG Torch
• K1783-9 PTA 26V TIG Torch
Magnum Parts Kit and Argon Gas
• KP509 Parts Kit
K930-2 TIG Module (Requires)
• Requires K938-1 Contactor Kit,
• K936-4 Control Cable, and
• K814 Arc Start Switch
Optional TIG Module Accessory:
• K939-1 Docking Kit
• K937-45 Control Cable Extensions (45ft.)
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC