National Instruments MID-7654 Impact Driver User Manual


 
MID-7654/7652 Servo Power Motor Drive User Guide 34 ni.com
AC power................................................Detachable AC power cord
(IEC standard type)
Motion I/O..............................................68-pin female high density
VHDCI type
Environment
Operating temperature............................0 to 50 °C (32 to 122 °F)
Storage temperature................................20 to 70 °C(4to158°F)
Humidity.................................................10% 90% (noncondensing)
Maximum Altitude .................................2,000 meters
Pollution Degree.....................................2
Indoor Use Only
Power Supply
Input voltage...........................................90132 VAC / 198264 VAC,
4763 Hz
Input fuse
115 VAC (factory default)...............8 A (Littelfuse #312008)
230 VAC..........................................6 A (Littelfuse #312006)
Input fuse dimensions.............................0.25 in. by 1.25 in.
Input Power Peak Current (at max load)
115 VAC..........................................10 A
230 VAC..........................................5 A
Installation category ...............................II
Host Bus Voltage Interlock
Undervoltage threshold...........................4 VDC
Physical
Length.....................................................30.6 by 25.4 by 8.8 cm
(12.0by10by3.5in.)
Weight ....................................................10.2 kg (22.5 lb.)