Filter
Top Products
12-28
Chapter 12 HXYLX
5-5-2 Belt cover
Removing the belt cover
1) Loosen the hexagon bolts (M4, two bolts) on the front with a spanner or
socket wrench. After removing the M4 screws on the top, pull the cover up-
ward and off. (Refer to the following photograph.)
M4 screw (two screws)
M4 hexagon bolt (two bolts)
Installing the belt cover
1) Fit the cover so that the notch on the cover passes between the hexagon bolts.
Tighten the hexagon bolts with a spanner or socket wrench, and then fix from
above with the M4 screws.