A SERVICE OF

logo

88 BIOS Setup
MX3 Reference Guide E-EQ-MX3RG-J-ARC
Suspend
This parameter establishes how long the MX3 senses inactivity on the system before entering
Suspend Mode. This option is used to conserve battery life.
Pressing the Power key once also places the MX3 in Suspend Mode. Once in the Suspend state,
the Status LED blinks green.
Use the Power key to wake the MX3 from suspend mode or a touch on an installed touch screen.
The Suspend Timer is reset every time one of the following occurs:
Video write Keypress
Disk / IFA Access Touch screen touch-up
COM 1 or COM 2 access
PCMCIA Slot 0 IRQ, Slot 1 IRQ and Controller IRQ
Note: Disabling the Suspend timer does not
disable the Off Timer.
Values: 0 - 63 minutes (in 1 minute increments)
Default: 5 Min
A value of 0 means “Disabled”.
Note: Suspend can be disabled when the MX3 is to be in a cradle. See the Docked PM
parameter.