BIOS Setup 91
E-EQ-MX3RG-J-ARC MX3 Reference Guide
Troubleshooting
The MX3 will not turn off -- force the MX3 to power off by holding the Power key down for 15
seconds -- the MX3 will power off. Locate and correct the problem before powering the MX3
back on – e.g. IRQ conflict, very low battery power, radio conflict, unexpected software
application result, etc.
Keyboard
When changes have been made, press an arrow key to go to another parameter or menu or press
ESC to go to the Exit Menu.
Caps
This parameter is used to determine whether the CAPS function is turned on or off at bootup.
Values: On, Off
Default: Off
NumLock
Use this option to set NumLock at boot time. When NumLock is On, the keypad is locked in
numeric mode. When NumLock is Off the numeric keys are inoperable.
Whether NumLock at Boot is Off or On, no LED is illuminated on the MX3.
Values: On, Off
Default: On
Rpt Delay
The Rpt Delay parameter will designate the period of time from the depression of a key until the
key repeats.
Values: 0.25 to 2.00 second
(0.25, 0.5, 0.75, 1.00, 1.25, 1.50, 1.75, 2.00)
Default: 0.5 seconds
Rpt Rate
The Rpt Rate parameter sets the number of times a keystroke will be repeated, per second, as the
key is depressed.
Values: 2 to 30 chars per second
(2, 6, 10, 15, 20, 30)
Default: 10 chars per second
CtlAltDel
This parameter determines whether the user can restart the MX3 by pressing the reboot key
sequence: CTRL+ALT+2
nd
+ DOT.
When this parameter is No Reboot, the reboot key sequence will have no effect.
Values: Reboot, No Reboot
Default: Reboot
