Installed Software 59
E-EQ-MX3RG-J-ARC MX3 Reference Guide
Terminal Emulation Directories
Please refer to the specific Terminal Emulation’s reference guide for complete
instructions.
Batch MX3’s do not have terminal emulation (TE) files and may or may not have a radio card.
When a need exists to convert a batch MX3 to a TE unit or a different radio card, contact LXE
Customer Services for assistance.
Note: 900 MHz radio files are loaded in the Terminal Emulation subdirectories, i.e. \APLUS,
\LDSPLUS, \IBM (for both 3270 and 5250).
The terminal emulator resident on the MX3 determines the radio card type (900 MHz or 2.4 GHz)
installed in the MX3. Following are the directory names containing the TE program files:
\APLUS ANSI Plus with 2.4 GHz radio
\APLUS ANSI Plus with 900 MHz radio
\LDS24 DOS LDS Plus with 2.4 GHz radio
\LDSPLUS DOS LDS Plus with 900 MHz radio
\IBM DOS IBM 3270 with 900 MHz radio
\IBM DOS IBM 5250 with 900 MHz radio
\IBM24 TN3270 with 2.4 GHz radio
\IBM24 TN5250 with 2.4 GHz radio
Note: Dual TE’s are supported on MX3 computers with an 8 Meg. Flash drive. MX3’s with a 4
Meg. DO NOT support dual TE’s.
