32 Display
MX3 Reference Guide E-EQ-MX3RG-J-ARC
Display
Figure 2-4 MX3 Display
The MX3 display is a transflective monochrome VGA LCD unit capable of supporting gray
scales. The display window is 640 pixels (horizontal) x 240 pixels (vertical). VGA graphics are
supported with this display.
Four font sizes are supported. The choice between font sizes is made in the BIOS Setup. Font size
selection may be overridden by a user supplied application, such as the ANSI Plus TE.
Character size is 2.28mm (width) by 4.92mm (height) in VGA 8x16 text mode and 2.28mm
(width) by 2.28mm (height) in 8x08 text mode.
Depending on the font size used, the display window’s size in DOS mode is:
Font Size in Pixels Rows Columns
8x8 30 80
8x16 15 80
Note: Please refer to the specific Terminal Emulation Reference Guide for font and screen
sizes available when using the TE software.
The display is automatically turned off when the MX3 enters the Suspend state, Critical Suspend
state or the Display Timer expires (Display Timer default is 15 seconds).
