A SERVICE OF

logo

158 Startup Problems
MX3 Reference Guide E-EQ-MX3RG-J-ARC
Edit BIOS Setup
6. During bootup the <F2> key must be pressed to enter BIOS Setup. You may
need to reboot.
7. At the BIOS Setup Main Menu, view Boot parameter.
8. If the Boot Sequence parameter is not already highlighted, press the
<DownArrow> until it is highlighted.
9. Press SPC until the field entry is changed to “A: then C:”.
10. Press <Right Arrow> until you reach the Exit menu.
11. Select “Save and Exit” to save the changes. Press <Enter>.