92 BIOS Setup
MX3 Reference Guide E-EQ-MX3RG-J-ARC
Other
When changes have been made, press an arrow key to go to another parameter or menu or press
ESC to go to the Exit Menu.
Font
The Font parameter selects the screen display font size.
Note: This font size choice may be overridden by an application.
Values: 8x8
8x16
Default: 8x16
COM1 Pin9
This option is used to configure the endcap COM 1 serial port.
Values: RI (Ring Indicator)
5V
Default: RI
The MX3 has two serial ports available in three configurations.
In the first configuration, both COM1 and COM2 are connected to individual D-9 connectors on
the endcap.
In addition, COM2 is software switchable between the D-9 serial port and the internal IR port
located on the back of the unit.
In the third configuration, COM1 is connected to an internal SE923 scanner and COM2 is
software switchable between the D-9 connector on the endcap and the internal IR port on the back
of the unit.
Power to the COM ports may be turned off using a terminal emulation configuration utility.
COM2 Pin9
This option is used to configure the endcap COM 2 serial port.
Values: RI (Ring Indicator)
5V
Default: RI
The MX3 has two serial ports available in three configurations.
In the first configuration, both COM1 and COM2 are connected to individual D-9 connectors on
the endcap.
In addition, COM2 is software switchable between the D-9 serial port and the internal IR port
located on the back of the unit.
In the third configuration, COM1 is connected to an internal SE923 scanner and COM2 is
software switchable between the D-9 connector on the endcap and the internal IR port on the back
of the unit.
Power to the COM ports may be turned off using a terminal emulation configuration utility.
